top of page
**Check out my IG reels about this piece:
SEEDCIRCUIT [1]
 |  |  |
|---|---|---|
 |  |  Yellowheart |
 Osage Orange |  Paduak |  Bloodwood |
 Purpleheart |  |  |
 |  |  |
SEEDCIRCUIT [1]
YELLOWHEART, OSAGE ORANGE, PADUAK, BLOODWOOD, PURPLEHEART, CAST RESIN, ALUMINUM, LIGHT
42” x 40” x 7.5”
2022
Drawings, Plans & In-Progress Shots
 Original drawing |  |  |
|---|---|---|
 Pattern for Osage Orange cube |  Pattern for Paduak cube |  Pattern for Purple Heart cube |
 Making the (1st of several) silicon mold |  Mold curing |  Mold complete |
 Test casting cubes |  1st jig to center the wood cube in the mold |  Cube centering jig in mold |
 Wood cubes in-progress |  Vacuum chamber; sucks all the air out of the resin after mixing and before curing |  Pressure tank (for casting); removes any residual bubbles in the resin by crushing them down to micro-size while resin cures |
 I made several resin-mixers for use in my drill |  Studio casting set-up (with the old crappy pressure tank) |  I had to make SO MANY cubes to get 5 good ones |
 Cube polishing |  Beautiful completed cubes! |  Holders in progress |
 |  |  Welding the aluminum holders |
 |  Tapping the holders (so they can be screwed to the wall pedestal) |  |
 |  |  |
 |  |  Holders and cubes test layout for wall pedestal |
 Pattern made from test-layout of holders |  Pattern made from the test-layouts of holders; used to transfer hole placement to wall pedestal |  |
 All the holders sealed and pretty |  Sealing the aluminum |  Final pedestal test |
 Installing the back-light |  Back of the wall pedestal |
bottom of page